dmesg - 2012-06-15 03:58
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.12-gentoo (root@huo-w520) (gcc version 4.6.3 (Gentoo 4.6.3 p1.3, pie-0.5.2) ) #1 SMP Tue Jun 12 14:16:23 CST 2012
Command line: root=/dev/sdc2
KERNEL supported cpus:
Intel GenuineIntel
Disabled fast string operations
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
BIOS-e820: 0000000040200000 - 00000000b3da0000 (usable)
BIOS-e820: 00000000b3da0000 - 00000000bae9f000 (reserved)
BIOS-e820: 00000000bae9f000 - 00000000baf9f000 (ACPI NVS)
BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data)
BIOS-e820: 00000000bafff000 - 00000000bfa00000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffd20000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000083e600000 (usable)
BIOS-e820: 000000083e600000 - 000000083f000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: LENOVO 4270CTO/4270CTO, BIOS 8BET57WW (1.37 ) 04/06/2012
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x83e600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BC000000 mask FFC000000 uncachable
4 base 0BB000000 mask FFF000000 uncachable
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask E00000000 write-back
7 base 400000000 mask C00000000 write-back
8 base 800000000 mask FC0000000 write-back
9 base 83F000000 mask FFF000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xb3da0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
init_memory_mapping: 0000000000000000-00000000b3da0000
0000000000 - 00b3c00000 page 2M
00b3c00000 - 00b3da0000 page 4k
kernel direct mapping tables up to b3da0000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-000000083e600000
0100000000 - 083e600000 page 2M
kernel direct mapping tables up to 83e600000 @ b3d7e000-b3da0000
ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO)
ACPI: XSDT 00000000baffe120 000AC (v01 LENOVO TP-8B 00001370 PTEC 00000002)
ACPI: FACP 00000000bafe8000 000F4 (v04 LENOVO TP-8B 00001370 PTL 00000002)
ACPI: DSDT 00000000bafeb000 0E71E (v01 LENOVO TP-8B 00001370 INTL 20061109)
ACPI: FACS 00000000baf2d000 00040
ACPI: SLIC 00000000baffd000 00176 (v01 LENOVO TP-8B 00001370 PTEC 00000001)
ACPI: SSDT 00000000baffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
ACPI: SSDT 00000000baffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
ACPI: SSDT 00000000baffa000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: HPET 00000000bafe7000 00038 (v01 LENOVO TP-8B 00001370 PTL 00000002)
ACPI: APIC 00000000bafe6000 00098 (v01 LENOVO TP-8B 00001370 PTL 00000002)
ACPI: MCFG 00000000bafe5000 0003C (v01 LENOVO TP-8B 00001370 PTL 00000002)
ACPI: ECDT 00000000bafe4000 00052 (v01 LENOVO TP-8B 00001370 PTL 00000002)
ACPI: ASF! 00000000bafea000 000A5 (v32 LENOVO TP-8B 00001370 PTL 00000002)
ACPI: TCPA 00000000bafe3000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT 00000000bafe2000 00C63 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 00000000bafe1000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: DMAR 00000000bafe0000 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: UEFI 00000000bafdf000 0003E (v01 LENOVO TP-8B 00001370 PTL 00000002)
ACPI: UEFI 00000000bafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: UEFI 00000000bafdd000 00292 (v01 LENOVO TP-8B 00001370 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000083e600000
Initmem setup node 0 0000000000000000-000000083e600000
NODE_DATA [000000083e5fd000 - 000000083e5fffff]
[ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081de00000-ffff88083dbfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0083e600
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x00020000
0: 0x00020200 -> 0x00040000
0: 0x00040200 -> 0x000b3da0
0: 0x00100000 -> 0x0083e600
On node 0 totalpages: 8331053
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 715232 pages, LIFO batch:31
Normal zone: 118680 pages used for memmap
Normal zone: 7476840 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 00000000b3da0000 - 00000000bae9f000
PM: Registered nosave memory: 00000000bae9f000 - 00000000baf9f000
PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000
PM: Registered nosave memory: 00000000bafff000 - 00000000bfa00000
PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd20000
PM: Registered nosave memory: 00000000ffd20000 - 0000000100000000
Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88083e200000 s76224 r8192 d22080 u262144
pcpu-alloc: s76224 r8192 d22080 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8195984
Policy zone: Normal
Kernel command line: root=/dev/sdc2
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32720372k/34576384k available (6966k kernel code, 1252172k absent, 603840k reserved, 5935k data, 520k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2192.791 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4385.58 BogoMIPS (lpj=2192791)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 98000
Disabled fast string operations
#2
smpboot cpu 2: start_ip = 98000
Disabled fast string operations
#3
smpboot cpu 3: start_ip = 98000
Disabled fast string operations
#4
smpboot cpu 4: start_ip = 98000
Disabled fast string operations
#5
smpboot cpu 5: start_ip = 98000
Disabled fast string operations
#6
smpboot cpu 6: start_ip = 98000
Disabled fast string operations
#7 Ok.
smpboot cpu 7: start_ip = 98000
Disabled fast string operations
Brought up 8 CPUs
Total of 8 processors activated (35082.33 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at bae9f000 (1048576 bytes)
RTC time: 14:47:30, date: 06/15/12
NET: Registered protocol family 16
kworker/u:0 used greatest stack depth: 6552 bytes left
kworker/u:0 used greatest stack depth: 5576 bytes left
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 00000000bae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 00000000bae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PUBS] (on)
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 2 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfebfffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff]
pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x6000-0x603f]
pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xf3a25000-0xf3a2500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
pci 0000:00:19.0: reg 10: [mem 0xf3a00000-0xf3a1ffff]
pci 0000:00:19.0: reg 14: [mem 0xf3a2b000-0xf3a2bfff]
pci 0000:00:19.0: reg 18: [io 0x6080-0x609f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xf3a2a000-0xf3a2a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf3a20000-0xf3a23fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xf3a29000-0xf3a293ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x60a8-0x60af]
pci 0000:00:1f.2: reg 14: [io 0x60bc-0x60bf]
pci 0000:00:1f.2: reg 18: [io 0x60a0-0x60a7]
pci 0000:00:1f.2: reg 1c: [io 0x60b8-0x60bb]
pci 0000:00:1f.2: reg 20: [io 0x6060-0x607f]
pci 0000:00:1f.2: reg 24: [mem 0xf3a28000-0xf3a287ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xf3a24000-0xf3a240ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10de:0dfa] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0x5000-0x507f]
pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: [8086:4238] type 0 class 0x000280
pci 0000:03:00.0: reg 10: [mem 0xf3900000-0xf3901fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xf3900000-0xf39fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf38fffff]
pci 0000:00:1c.3: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
pci 0000:0d:00.0: [1180:e823] type 0 class 0x000880
pci 0000:0d:00.0: reg 10: [mem 0xf2901000-0xf29010ff]
pci 0000:0d:00.0: supports D1 D2
pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.0: PME# disabled
pci 0000:0d:00.3: [1180:e832] type 0 class 0x000c00
pci 0000:0d:00.3: reg 10: [mem 0xf2900000-0xf29007ff]
pci 0000:0d:00.3: supports D1 D2
pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.3: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf2900000-0xf30fffff]
pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
pci 0000:0e:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:0e:00.0: reg 10: [mem 0xf2800000-0xf2801fff 64bit]
pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0e:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 0e-0e]
pci 0000:00:1c.6: bridge window [mem 0xf2800000-0xf28fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 00000000b3da0000 - 00000000b3ffffff
reserve RAM buffer: 000000083e600000 - 000000083fffffff
cfg80211: Calling CRDA to update world regulatory domain
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000c0000-0x000c3fff]
pnp 00:00: [mem 0x000c4000-0x000c7fff]
pnp 00:00: [mem 0x000c8000-0x000cbfff]
pnp 00:00: [mem 0x000cc000-0x000cffff]
pnp 00:00: [mem 0x000d0000-0x000d3fff]
pnp 00:00: [mem 0x000d4000-0x000d7fff]
pnp 00:00: [mem 0x000d8000-0x000dbfff]
pnp 00:00: [mem 0x000dc000-0x000dffff]
pnp 00:00: [mem 0x000e0000-0x000e3fff]
pnp 00:00: [mem 0x000e4000-0x000e7fff]
pnp 00:00: [mem 0x000e8000-0x000ebfff]
pnp 00:00: [mem 0x000ec000-0x000effff]
pnp 00:00: [mem 0x000f0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0xbf9fffff]
pnp 00:00: [mem 0xfec00000-0xffffffff]
pnp 00:00: [mem 0xfed4c000-0xfed4bfff disabled]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-fe]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000c3fff window]
pnp 00:01: [mem 0x000c4000-0x000c7fff window]
pnp 00:01: [mem 0x000c8000-0x000cbfff window]
pnp 00:01: [mem 0x000cc000-0x000cffff window]
pnp 00:01: [mem 0x000d0000-0x000d3fff window]
pnp 00:01: [mem 0x000d4000-0x000d7fff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff window]
pnp 00:01: [mem 0x000dc000-0x000dffff window]
pnp 00:01: [mem 0x000e0000-0x000e3fff window]
pnp 00:01: [mem 0x000e4000-0x000e7fff window]
pnp 00:01: [mem 0x000e8000-0x000ebfff window]
pnp 00:01: [mem 0x000ec000-0x000effff window]
pnp 00:01: [mem 0xbfa00000-0xfebfffff window]
pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0090-0x009f]
pnp 00:02: [io 0x0024-0x0025]
pnp 00:02: [io 0x0028-0x0029]
pnp 00:02: [io 0x002c-0x002d]
pnp 00:02: [io 0x0030-0x0031]
pnp 00:02: [io 0x0034-0x0035]
pnp 00:02: [io 0x0038-0x0039]
pnp 00:02: [io 0x003c-0x003d]
pnp 00:02: [io 0x00a4-0x00a5]
pnp 00:02: [io 0x00a8-0x00a9]
pnp 00:02: [io 0x00ac-0x00ad]
pnp 00:02: [io 0x00b0-0x00b5]
pnp 00:02: [io 0x00b8-0x00b9]
pnp 00:02: [io 0x00bc-0x00bd]
pnp 00:02: [io 0x0050-0x0053]
pnp 00:02: [io 0x0072-0x0077]
pnp 00:02: [io 0x0400-0x047f]
pnp 00:02: [io 0x0500-0x057f]
pnp 00:02: [io 0x0800-0x080f]
pnp 00:02: [io 0x15e0-0x15ef]
pnp 00:02: [io 0x1600-0x167f]
pnp 00:02: [mem 0xf8000000-0xfbffffff]
pnp 00:02: [mem 0x00000000-0x00000fff]
pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
pnp 00:02: [mem 0xfed10000-0xfed13fff]
pnp 00:02: [mem 0xfed18000-0xfed18fff]
pnp 00:02: [mem 0xfed19000-0xfed19fff]
pnp 00:02: [mem 0xfed45000-0xfed4bfff]
pnp 00:02: [mem 0xfed40000-0xfed44fff]
system 00:02: [io 0x0400-0x047f] has been reserved
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0x0800-0x080f] has been reserved
system 00:02: [io 0x15e0-0x15ef] has been reserved
system 00:02: [io 0x1600-0x167f] has been reserved
system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:02: [mem 0x00000000-0x00000fff] could not be reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xf3900000-0xf39fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf38fffff]
pci 0000:00:1c.3: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf2900000-0xf30fffff]
pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 0e-0e]
pci 0000:00:1c.6: bridge window [mem 0xf2800000-0xf28fffff]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf3900000-0xf39fffff]
pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xf3100000-0xf38fffff]
pci_bus 0000:05: resource 2 [mem 0xf1800000-0xf1ffffff 64bit pref]
pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0d: resource 1 [mem 0xf2900000-0xf30fffff]
pci_bus 0000:0d: resource 2 [mem 0xf2000000-0xf27fffff 64bit pref]
pci_bus 0000:0e: resource 1 [mem 0xf2800000-0xf28fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: power state changed by ACPI to D0
pci 0000:00:1a.0: power state changed by ACPI to D0
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:0e:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800afd7e000 - ffff8800b3d7e000
software IO TLB at phys 0xafd7e000 - 0xb3d7e000
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x26
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x26
microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x26
microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x26
microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x26
microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x26
microcode: Microcode Update Driver: v2.00 , Peter Oruba
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NTFS driver 2.1.30 [Flags: R/O].
fuse init (API version 7.17)
msgmni has been set to 32768
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (63 C)
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
ACPI: Battery Slot [BAT0] (battery present)
mtrr: no more MTRRs available
[drm] MTRR allocation failed. Graphics performance may suffer.
i915 0000:00:02.0: irq 41 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
fbcon: inteldrmfb (fb0) is primary device
Refined TSC clocksource calibration: 2192.876 MHz.
Switching to clocksource tsc
Console: switching to colour frame buffer device 240x67
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:01: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
acpi device:0b: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input4
ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf3a28000 port 0xf3a28100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf3a28000 port 0xf3a28180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xf3a28000 port 0xf3a28200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xf3a28000 port 0xf3a28280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xf3a28000 port 0xf3a28300 irq 42
ata6: DUMMY
bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:98:88:0d
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
ehci_hcd 0000:00:1a.0: support lpm
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: supports USB remote wakeup
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf3a2a000
ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.12-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
ehci_hcd 0000:00:1d.0: support lpm
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: supports USB remote wakeup
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf3a29000
ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.12-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 20ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
xhci_hcd 0000:0e:00.0: setting latency timer to 64
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0e:00.0: supports USB remote wakeup
xhci_hcd 0000:0e:00.0: irq 18, io mem 0xf2800000
xhci_hcd 0000:0e:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 51 for MSI/MSI-X
usb usb3: default language 0x0409
usb usb3: udev 1, busnum 3, minor = 256
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.12-gentoo xhci_hcd
usb usb3: SerialNumber: 0000:0e:00.0
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
usb usb3: adding 3-0:1.0 (config #1, interface 0)
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: individual port power switching
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: Single TT
hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 3-0:1.0: power on to power good time: 20ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: enabling power on all ports
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:0e:00.0: supports USB remote wakeup
usb usb4: skipped 1 descriptor after endpoint
usb usb4: default language 0x0409
usb usb4: udev 1, busnum 4, minor = 384
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.12-gentoo xhci_hcd
usb usb4: SerialNumber: 0000:0e:00.0
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
usb usb4: adding 4-0:1.0 (config #1, interface 0)
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: individual port power switching
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 4-0:1.0: power on to power good time: 20ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: enabling power on all ports
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1: status 0501 change 0001
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
ata1.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 8BET57WW (1.37 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad W520, model 4270CTO
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
hda_codec: CX20590: BIOS auto-probing.
ALSA device list:
#0: HDA Intel PCH at 0xf3a20000 irq 52
#29: ThinkPad Console Audio Control at EC reg 0x30, fw unknown
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Registering the dns_resolver key type
PM: Checking hibernation image partition /dev/sdb5
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1
ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
hub 2-0:1.0: port 1: status 0501 change 0001
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
sd 0:0:0:0: [sda] Attached SCSI disk
hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1a.0: port 1 high speed
ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ehci_hcd 0000:00:1a.0: port 1 high speed
ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ATA-8: ST95005620AS, SD24, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST95005620AS SD24 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
ehci_hcd 0000:00:1a.0: LPM: no device attached
usb 1-1: udev 2, busnum 1, minor = 1
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
hub 1-1:1.0: usb_probe_interface
hub 1-1:1.0: usb_probe_interface - got id
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 1-1:1.0: standalone hub
hub 1-1:1.0: individual port power switching
hub 1-1:1.0: individual port over-current protection
hub 1-1:1.0: Single TT
hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-1:1.0: power on to power good time: 100ms
hub 1-1:1.0: local power source is good
hub 1-1:1.0: enabling power on all ports
hub 2-0:1.0: state 7 ports 3 chg 0002 evt 0000
hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.0: port 1 high speed
ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
hub 1-1:1.0: port 3: status 0101 change 0001
hub 1-1:1.0: port 4: status 0101 change 0001
hub 1-1:1.0: port 6: status 0101 change 0001
usb 2-1: new high-speed USB device number 2 using ehci_hcd
ehci_hcd 0000:00:1d.0: port 1 high speed
ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
usb 1-1: link qh256-0001/ffff88081860b480 start 1 [1/0 us]
IBM TrackPoint firmware: 0x0e, buttons: 3/3
ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
ehci_hcd 0000:00:1d.0: LPM: no device attached
usb 2-1: udev 2, busnum 2, minor = 129
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: usb_probe_device
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
hub 2-1:1.0: usb_probe_interface
hub 2-1:1.0: usb_probe_interface - got id
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
hub 2-1:1.0: standalone hub
hub 2-1:1.0: individual port power switching
hub 2-1:1.0: individual port over-current protection
hub 2-1:1.0: Single TT
hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
hub 2-1:1.0: power on to power good time: 100ms
hub 2-1:1.0: local power source is good
hub 2-1:1.0: enabling power on all ports
hub 1-1:1.0: state 7 ports 6 chg 0058 evt 0000
hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
hub 1-1:1.0: port 3 not reset yet, waiting 10ms
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 >
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATA-7: INTEL SSDMAEMC080G2, 2CV102M3, max UDMA/133
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA INTEL SSDMAEMC08 2CV1 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3
sd 2:0:0:0: [sdc] Attached SCSI disk
usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
hub 1-1:1.0: port 3 not reset yet, waiting 10ms
usb 2-1: link qh256-0001/ffff88081860b880 start 1 [1/0 us]
usb 1-1.3: ep0 maxpacket = 8
usb 1-1.3: default language 0x0409
usb 1-1.3: udev 3, busnum 1, minor = 2
usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: Biometric Coprocessor
usb 1-1.3: Manufacturer: UPEK
usb 1-1.3: usb_probe_device
usb 1-1.3: configuration #1 chosen from 1 choice
usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
hub 1-1:1.0: port 4 not reset yet, waiting 10ms
usb 1-1.4: new full-speed USB device number 4 using ehci_hcd
hub 1-1:1.0: port 4 not reset yet, waiting 10ms
usb 1-1.4: skipped 1 descriptor after interface
usb 1-1.4: default language 0x0409
usb 1-1.4: udev 4, busnum 1, minor = 3
usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Broadcom Bluetooth Device
usb 1-1.4: Manufacturer: Broadcom Corp
usb 1-1.4: SerialNumber: 60D819F11B28
usb 1-1.4: usb_probe_device
usb 1-1.4: configuration #1 chosen from 1 choice
usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
usb 1-1.4: adding 1-1.4:1.2 (config #1, interface 2)
usb 1-1.4: adding 1-1.4:1.3 (config #1, interface 3)
hub 1-1:1.0: port 6, status 0101, change 0000, 12 Mb/s
hub 1-1:1.0: port 6 not reset yet, waiting 10ms
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1.6: new high-speed USB device number 5 using ehci_hcd
hub 1-1:1.0: port 6 not reset yet, waiting 10ms
usb 1-1.6: skipped 1 descriptor after configuration
usb 1-1.6: skipped 5 descriptors after interface
usb 1-1.6: skipped 1 descriptor after endpoint
usb 1-1.6: skipped 20 descriptors after interface
usb 1-1.6: default language 0x0409
usb 1-1.6: udev 5, busnum 1, minor = 4
usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Integrated Camera
usb 1-1.6: Manufacturer: Ricoh Company Ltd.
usb 1-1.6: usb_probe_device
usb 1-1.6: configuration #1 chosen from 1 choice
usb 1-1.6: adding 1-1.6:1.0 (config #1, interface 0)
uvcvideo 1-1.6:1.0: usb_probe_interface
uvcvideo 1-1.6:1.0: usb_probe_interface - got id
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8
usb 1-1.6: adding 1-1.6:1.1 (config #1, interface 1)
hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010
hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000
ata5: SATA link down (SStatus 0 SControl 300)
PM: Hibernation image partition 8:21 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
Magic number: 0:846:788
rtc_cmos 00:07: setting system clock to 2012-06-15 14:47:33 UTC (1339771653)
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
EXT4-fs (sdc2): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sdc2): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:34.
Freeing unused kernel memory: 520k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1204k freed
Freeing unused kernel memory: 1844k freed
init-early.sh used greatest stack depth: 4560 bytes left
udevd[1465]: starting version 171
udevadm used greatest stack depth: 4368 bytes left
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 5)
sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:0d:00.0: setting latency timer to 64
Registered led device: mmc0::
Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Copyright(c) 2003-2011 Intel Corporation
iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlwifi 0000:03:00.0: setting latency timer to 64
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc90007ef4000
iwlwifi 0000:03:00.0: HW Revision ID = 0x35
iwlwifi 0000:03:00.0: irq 53 for MSI/MSI-X
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
iwlwifi 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0X1f0
iwlwifi 0000:03:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
expr used greatest stack depth: 4352 bytes left
firewire_ohci 0000:0d:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
firewire_ohci 0000:0d:00.3: setting latency timer to 64
iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
Registered led device: phy0-led
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usb 1-1.6: link qh16-0001/ffff8808169d9880 start 2 [1/0 us]
usb 1-1.6: unlink qh16-0001/ffff8808169d9880 start 2 [1/0 us]
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
btusb 1-1.4:1.0: usb_probe_interface
btusb 1-1.4:1.0: usb_probe_interface - got id
btusb 1-1.4:1.2: usb_probe_interface
btusb 1-1.4:1.2: usb_probe_interface - got id
btusb 1-1.4:1.3: usb_probe_interface
btusb 1-1.4:1.3: usb_probe_interface - got id
usbcore: registered new interface driver btusb
usb 1-1.4: link qh1-0e01/ffff880816806400 start 0 [1/2 us]
firewire_ohci: Added fw-ohci device 0000:0d:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: enabling device (0000 -> 0003)
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.49 Mon Apr 30 23:46:33 PDT 2012
firewire_core: created device fw0: GUID f0def1ff98880dff, S400
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend, wakeup 1
hub 4-0:1.0: hub_suspend
usb usb4: bus auto-suspend, wakeup 1
vboxdrv: Found 8 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0d9a1a0
vboxdrv: fAsync=0 offMin=0x24c offMax=0xe456
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.16 (interface 0x00190000).
hub 2-1:1.0: hub_suspend
usb 2-1: unlink qh256-0001/ffff88081860b880 start 1 [1/0 us]
usb 2-1: usb auto-suspend, wakeup 1
EXT4-fs (sdc2): re-mounted. Opts: discard
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: discard
usb 1-1.4: unlink qh1-0e01/ffff880816806400 start 0 [1/2 us]
usb 1-1: clear tt buffer port 4, a4 ep2 t04048d80
Adding 34496508k swap on /dev/sdb5. Priority:-1 extents:1 across:34496508k
usb 1-1.6: usb auto-suspend, wakeup 0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend, wakeup 1
ehci_hcd 0000:00:1d.0: suspend root hub
wlan0: authenticate with 8c:21:0a:d9:87:f7 (try 1)
wlan0: authenticated
wlan0: associate with 8c:21:0a:d9:87:f7 (try 1)
wlan0: RX AssocResp from 8c:21:0a:d9:87:f7 (capab=0x431 status=0 aid=4)
wlan0: associated
wlan0: No basic rates in AssocResp. Using min supported rate instead.
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
iwlwifi 0000:03:00.0: Tx aggregation enabled on ra = 8c:21:0a:d9:87:f7 tid = 0
kworker/u:0 used greatest stack depth: 4048 bytes left
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
flush-253:6 used greatest stack depth: 3992 bytes left
ata1.00: configured for UDMA/133
ata1: EH complete
ata2.00: configured for UDMA/133
ata2: EH complete
ata3.00: configured for UDMA/133
ata3: EH complete
EXT4-fs (sdc2): re-mounted. Opts: discard,commit=0
EXT4-fs (dm-3): re-mounted. Opts: discard,commit=0
EXT4-fs (dm-4): re-mounted. Opts: discard,commit=0
EXT4-fs (dm-1): re-mounted. Opts: discard,commit=0
EXT4-fs (dm-5): re-mounted. Opts: discard,commit=0
EXT4-fs (dm-2): re-mounted. Opts: discard,commit=0
EXT4-fs (dm-6): re-mounted. Opts: discard,commit=0
EXT4-fs (dm-0): re-mounted. Opts: discard,commit=0
EXT4-fs (sdc1): re-mounted. Opts: discard,commit=0
usb 1-1.6: usb auto-resume
usb 1-1.6: finish resume
ehci_hcd 0000:00:1a.0: reused qh ffff8808169d9880 schedule
usb 1-1.6: link qh16-0001/ffff8808169d9880 start 2 [1/0 us]
usb 1-1.6: unlink qh16-0001/ffff8808169d9880 start 2 [1/0 us]
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
usb 1-1.6: usb auto-suspend, wakeup 0
bbswitch: version 0.4.2
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.VID_
bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG_.VID_
bbswitch: detected an Optimus _DSM function
bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
nvidia 0000:01:00.0: PCI INT A disabled
bbswitch: disabling discrete graphics
bbswitch: Result of Optimus _DSM call: 11000059
pci 0000:01:00.0: Refused to change power state, currently in D0
thinkpad_acpi: EC reports that Thermal Table has changed
pci 0000:01:00.0: power state changed by ACPI to D3
bbswitch: enabling discrete graphics
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
thinkpad_acpi: EC reports that Thermal Table has changed
pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100003)
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.49 Mon Apr 30 23:46:33 PDT 2012
nvidia-smi used greatest stack depth: 3808 bytes left
nvidia 0000:01:00.0: PCI INT A disabled
bbswitch: disabling discrete graphics
bbswitch: Result of Optimus _DSM call: 11000059
pci 0000:01:00.0: Refused to change power state, currently in D0
thinkpad_acpi: EC reports that Thermal Table has changed
pci 0000:01:00.0: power state changed by ACPI to D3
CPU2: Package power limit notification (total events = 1)
CPU1: Package power limit notification (total events = 1)
CPU4: Package power limit notification (total events = 1)
CPU3: Package power limit notification (total events = 1)
CPU5: Package power limit notification (total events = 1)
CPU7: Package power limit notification (total events = 1)
CPU0: Package power limit notification (total events = 1)
CPU6: Package power limit notification (total events = 1)
CPU3: Package power limit normal
CPU1: Package power limit normal
CPU5: Package power limit normal
CPU4: Package power limit normal
CPU2: Package power limit normal
CPU7: Package power limit normal
CPU6: Package power limit normal
CPU0: Package power limit normal
[Hardware Error]: Machine check events logged
CPU3: Package power limit normal
CPU4: Package power limit normal
CPU2: Package power limit normal
CPU5: Package power limit normal
CPU1: Package power limit normal
CPU0: Package power limit normal
CPU7: Package power limit normal
CPU6: Package power limit normal
[Hardware Error]: Machine check events logged